Whole-Network Visualization With Meraki Dashboard

Uncategorized

Part 2 of the 4-part series — Cloud tracking for Cisco Catalyst changes series

Welcome back to the second blog in our series for cloud tracking of Cisco Driver 9000 switches!

Like I stated in my last blog, the most essential step in your journey to the cloud begins with exposure. Rather than attempting to explain with too many words what I imply by visibility, I’m going to invest a long time showing you– so brace yourself for a great deal of screenshots.

No matter how you want to manage your network, be it digging deep into the command-line user interface (CLI) or making a couple of clicks in the Meraki control panel, picturing your whole network is extremely essential for numerous factors. In this blog site, I’m going to cover simply a couple of, however I ‘d like to hear your own reasons in the remarks below.

Picture-perfect visualization

Initially, you desire that picture-perfect view of your network. Being able to easily see if whatever is online (or not) from a single platform is important to your company.

For this particular circumstances, I’m logged into the Cisco San Francisco office network. I can immediately look at the health of the network, shown in the screenshot listed below.

Meraki dashboard network-wide health overview Figure 1. Meraki control panel network-wide health introduction From here, it’s simple to see I have an issue with 2 switches. I can click the switches to see a complete list of all of the switches on this network. I can also filter to just see the”unhealthy”switches. We’re going to get into troubleshooting in our next blog site, so remain tuned for that. Figure 2. Cloud-monitored Catalyst changes When I view the list of switches in this workplace, I can easily tell which gadgets are monitored Catalyst 9000 switches with the “Monitor Only “tag– you can’t miss it! Also in this list, you can see there are several monitored Driver 9300s as well as MS350s and one MS250. My point here– if you have a combined Driver and Meraki environment, you can see all of your devices from the Meraki control panel. I’ll even pop over and show the list of our latest Catalyst Wireless( CW)Wi-Fi 6E gain access to points, inspect it out: Figure 3. Cloud-managed Driver Wireless access points The ability to see all of my networks in a few clicks is genuinely a mic-drop moment– pause your reading here for effect.

Keeping track of Catalyst switches

Let’s get back to the “Display Just” switch. By clicking on the switch you can see all of the needed info for the switch to work. Again, this is a monitored Driver 9300 switch, so you’ll have the ability to view everything, but you can’t make any configuration modifications to a monitor-only switch.

In the initial view of the monitored Driver switch, you can see the following:

  • Physical address and location
  • LAN IP
  • Public IP
  • Entrance
  • Serial numbers: Driver and Meraki
  • Historic gadget data and client use data
  • The present firmware version on the switch

Change port presence

My individual favorite part about the Meraki dashboard, in case you have not seen, is the ease of usage. And my favorite part about the switches is you can actually click on the switch port you wish to view. This has been one of my favorite things to reveal folks live at trade convention.

Cloud-monitored Catalyst switch ports Figure 4. Cloud-monitored Driver switch ports Let’s pick that enjoyable little uplink port there, number 24. By clicking into that port you can see configurations (once again, no edit on Catalyst switches) and see status items like connection, usage, traffic, CDP/LLDP, and PoE use. You can likewise do things like cycle a port, mass cycle ports, run a MAC forwarding table, or simply ping an IP. I’ve spoken with customers that these last few products are a quite big deal and make their lives a ton much easier.

Network topology– the huge photo

Last, but certainly not least, we’re going to return cycle to the style of the “broad view” and visualization. The network topology view inside the Meraki control panel is such a powerful tool. If we follow the same switch here, we can see it in yellow on the far ideal. We can also see and click into the remainder of the network facilities from this geography view and see any monitored Catalyst 9000 gadgets and handled Meraki gadgets, as well as CW access points.

Whole network topology Figure 5. Whole network geography While it’s been enjoyable to stroll you through a cloud-monitored Catalyst 9000 switch and give a top-level introduction of the Meraki control panel, let’s not forget why we’re here. Envisioning your network facilities from a single dashboard can be one of the most effective tools to have in your set and a truly easy and fast method to reveal instant value.

If you’re ready now– excellent! Here’s our getting going guide. If you’re still checking out, have a look at our on-demand #CiscoChat where I and a couple of colleagues discuss all things cloud keeping an eye on today and what’s following.

Also, examine back in a month for my next blog site. We’ll be covering network troubleshooting.

Find out more about cloud

tracking for Driver switches from the experts Share: Source

Leave a Reply

Your email address will not be published. Required fields are marked *